BLGMZ - BEXANE PT A, 4032

  • MSDS: BLGMZ
  • Manufacturer: CERTIFIED LABS
  • Product Name: BEXANE PT A, 4032
  • National Stock Number: 8040-00N019325
Product Identification

Product ID:BEXANE PT A, 4032
MSDS Date:11/11/1987
FSC:8040
NIIN:00N019325
Kit Part:Y
MSDS Number: BLGMZ

Responsible Party
CERTIFIED LABS
IRVING, TX 75015
US

Emergency Phone: 214-438-1381

Info Phone: 214-438-1381

Preparer: MARK COHEN

Cage: 0A649

Contractor
CERTIFIED LABS DIV OF NCH CORP
152170 IRVING, TX 75015 US

Telephone: 214-438-1381972-438-1381

Cage: 53417

Ingredients

PROPANE, 2,2-BIS(P-(2,3- EPOXYPROPOXY)PHENYL)-;BISPHENOL A

CAS: 1675-54-3

RTECS: TX3800000

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT) 11 GM/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE SEVERE SKIN INJURY
(REDDENING & SWELLING). MAY CAUSE CHEMICAL BURNS IN THE EYE WITH
IRREVERSIBLE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION. SWALLOWING
CAN CAUSE NAUSEA, DIARRHEA, CRAMP ING & WEAKNESS. CHRONIC:
PROLONGED CONTACT WITH SKIN MAY CAUSE SENSITIZATION & ALLERGENIC
RESPONSES. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: PROLONGED BREATHING OF VAPORS CAN
LEAD TO SAME EFFECTS AS INGESTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED, ARTF RESP
SHOULD BE STARTED. O2 MAY BE GIVEN IF READILY AVAIL. SEEK MED ATTN
IMMED. EYE: FLUSH W/LRG AMTS OF H2O FOR AT LEAST 15 MIN, LIFTING
UPPER & LOWER LIDS OCCASIONALLY. GET MED ATTN IF IRRIT PERSISTS.
TRTMT IS MOST EFFECTIVE WITHIN 1 MIN. SKIN: THORO WASH EXPOSED AREA
W/SOAP & H2O. REMOVE CONTAM CLTHG. LAUNDER CONTAM CLTHG (SUPP DATA)

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL OR WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED RESPIRATOR AND FULL
PROTECTIVE EQUIP WHEN FIGHTING FIRES IN CONFINED AREAS TO PROTECT
FROM EXPOS TO ACRID SMOKE & HAZ DECOMP PROD.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. USE ABSORBANT
SUCH AS PAPER. VERMICULITE ETC. TO CONTAIN SPILL. DO NOT FLUSH TO
SEWER. PLACE INTO LABELED CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AT MODERATE TEMPERATURES. AVOID
CONTACT WITH SKIN.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. READ ENTIRE LABEL
BEFORE USING.

Exposure Controls

Respiratory Protection:TYPICAL USAGE OF PRODUCT DOES NOT REQUIRE THE
USE OF A RESPIRATOR. HOWEVER, IN AN EMERGENCY SITUATION, USE A
NIOSH/MSHA APPROVED ORGANIC VAPOR OR AIR-LINE RESPIRATORS. USE A
SCBA IN CONFINED SPACES.
Ventilation:LOCAL EXHAUST RECOMMENDED TO KEEP AIR CONCENTRATION WELL
BELOW ESTABLISED TLV.
Protective Gloves:WEAR IMPERVIOUS NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES (SUPP DATA)
Other Protective Equipment:RUBBER APRON. EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: BEFORE REUSE. APPLY EMOLLIENT RICH CREAM. INGEST: DO
NOT INDUCE VOMITING. KEEP PERSON WARM, QUIET AND GET MEDICAL
ATTENTION. ASPIRATION OF MATERIAL INTO THE LUNGS DUE TO VOMITING
CAN C AUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. EYE PROT: ADD
FULL LENGTH FACESHIELD TO GOGGLES .

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:500F,260C
Vapor Pres:< 0.01
Vapor Density:10
Evaporation Rate & Reference:< 0.01 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK GRAY SOLID. NO ODOR.
Percent Volatiles by Volume:< 2

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS AND OTHER EPOXY RESINS; STRONG OXIDIZERS.
Stability Condition to Avoid:MIXTURE OF PART A & B WILL HARDEN AND
GENERATE HEAT.
Hazardous Decomposition Products:ACRID SMOKE, CARBON MONOXIDE AND NOX.

Disposal

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBANT MAY BE DISPOSED OF IN A LANDFILL IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.